Price:> $834.85
The ES-2940 is a single rack mounted unit which contains two Audio Distribution Amplifiers, two Video Distribution Amplifiers and a five output RS-170A Black Burst Sync Generator (BBSG). The unit is designed to meet the requirements of systems which must interface with, distribute and synchronize video and audio signals. Each of the two 1 x 4 Video DA's provide a loop-thru input and four isolated outputs. Screwdriver adjustable Gain and EQ controls are accessible on the front panel, all inputs and outputs are provided on rear mounted BNC connectors. Both 1 x 4 Audio DA's accept one balanced (or unbalanced) audio signal and produce four identical copies. Each of the totally isolated outputs has its own front panel-mounted Gain control (an adjustable, internally mounted input attenuator is also provided). The audio inputs and outputs are accessible on rear mounted terminal blocks. If unbalanced outputs are desired, then each of the 1 x 4 Audio Distribution Amplifiers can provide up to eight separate and isolated feeds. The BBSG provides a convenient source of composite black burst for pre-blacking video tape or for general synchronization purposes. The output signal consists of sync, blanking, reference black setup level and colorburst which is SCH phased. The five RS-170A outputs are provided on rear mounted BNC connectors. Features: Two 1x4 Video Distribution Amplifiers with looping inputs Two 1x4 Audio Distribution Amplifiers A five-output RS-170A Video Blackburst Generator BNC connectors for Video Terminal blocks for Audio Isolated outputs Video Gain & High-frequency Equalization controls Audio Gain controls (one for each output) Single Rack unit 220-240 VAC (110-120 VAC is standard) & UL options available Video Gain & EQ Controls Audio Gain Controls Five RS-170A Black Burst/Sync Outputs Rack Mount Enclosure Two 1 X 4 Video DA's Two 1 X 4 Audio DA's Accepts Balanced or Unbalanced Audio Broadcast Quality Audio & Video Options Available: Black(1), J, P(1), UL W(1) Options: (Black) Black Anodized Front Panel-option available when standard panel is clear anodized List: $15.00 © Crystal Time Base (2-3 seconds week accuracy) List: $60.00 (D) Remote Control via 6 ft Cable, Connector, Switch Plate List: (extra cable at $2.00/ft) $65.00 (DC) 12 - 35 VDC Operation (No AC Power Input is supplied with Option "DC") List: $250.00 (ESE) ESE Serial Time Code Output List: $30.00 (EQ) Front panel accessible Equalization trimmer when cable is to exceed 100' (400' max.) List: 25.00 (J) 220 Volt / 50 Hz Operation (Standard is 117 Volt / 60 Hz) List: (+ option "UL" = $125.00) $30.00 (L2) 2 Additional Video Loop Thru's List: $150.00 (L4) 4 Additional Video Loop Thru's List: $300.00 (MT) Precision Multi-turn Potentiometers for Gain Control (Standard with ES-246/XLR) see above (P) 19" Rack Mount List: $55.00 (P2) 19" Rack Mount mounts two (2) units (with P2 Option) side-by-side (Consult ESE factory) List: $75.00 ® Rear-mounted connector for Remote Control (standard on many units) List: $55.00 (SV) S-VHS connectors are provided instead of standard BNC connectors List: $75.00 (Sync) Composite Sync Output; 2 vpp into 75. List: $30.00 (Tone) Continuous 1KHz Tone at 0db for Synching Audio with Video List: $55.00 (UL) "UL" Approved Wall Mount Power Supply List: (+ option "J" = $125.00) $60.00 (W) 3 Wire Line Cord List: $16.00 (XLR) XLR Connectors instead of standard Terminal Block see above NOTES: 1) Included at no charge 2) Includes Windows control software 3) With option 'SV' only one of the following options may be specified 'L2', 'L4', or 'P2'
Each of the two 1 x 4 Video DA's provide a loop-thru input and four isolated outputs. Screwdriver adjustable Gain and EQ controls are accessible on the front panel, all inputs and outputs are provided on rear mounted BNC connectors. Both 1 x 4 Audio DA's accept one balanced (or unbalanced) audio signal and produce four identical copies. Each of the totally isolated outputs has its own front panel-mounted Gain control (an adjustable, internally mounted input attenuator is also provided). The audio inputs and outputs are accessible on rear mounted terminal blocks. If unbalanced outputs are desired, then each of the 1 x 4 Audio Distribution Amplifiers can provide up to eight separate and isolated feeds. The BBSG provides a convenient source of composite black burst for pre-blacking video tape or for general synchronization purposes. The output signal consists of sync, blanking, reference black setup level and colorburst which is SCH phased. The five RS-170A outputs are provided on rear mounted BNC connectors.
Direct Ship From Manufacturer - Special Order Item: non-cancelable, non-returnable, non-refundable. 3 - 7 Business Day Delivery Time