Appsys Pro Audio Flexiverter MADI 128 x 128 Channel Format Converter for MADI Optical and Coaxial FLX-MADI

A Flexiverter is an ultra-compact box with a main format, dual power supply and a slot for a switchable AUX board, which adds the conversion format to the FLX unit. At the moment 5 FLX units and 10 AUX boards are available.

Format combinations provide the most common conversions with improved features and unique pairings
(e. g. AES50 <> Dante, Dante <> Dante SRC, Dante <> AVB).

The Flexlink Connection
The FlexLink connection is designed to connect two Flexiverters, or one Flexiverter with the Multiverter. It provides:

- 192x192 channels bi-directional transmission of 24-bit uncompressed audio (fully transparent to AES3 compatible metadata bits)
- Super-low link latency of 4 samples
- Dedicated, high-quality reference clock signal with automatic configuration
- Power supply for connected devices (to reduce cabling), alternatively serves as redundancy scheme when both devices are powered: in case
of power failure, both devices keep working from the remaining power supply.
- Uses standard HDMI cables (with locking screws), to provide easy field replacement in case of defects.

The Flexiverter FLX-MADI is the main format 128 x 128 channel EAS/EBU converter that converts between the built-in MADI interface and the AUX card.

Features:

• 3 Possible Flexiverter Applications - Stand Alone, Dual Mode and Multiverter Extension
• Status LEDs For Each Port
• DIP Switches for Advanced Configuration
• USB for Firmware Updates
• AUX Port for Optional Format Module

Specifications:

• Stand Alone (Converts between built-in AES67 interface and the AUX card)
• Channels (all can be used at the same time): 64×64 MADI @ 48kHz 32×32 MADI @ 96 kHz, 16×16 MADI @ 192kHz or maximum capacity of the AUX
  card, whichever is less
• Redundant Power Supply: up to 2x
• Battery-powered Operation (DC 12-15V): Yes
• Sample Rate Conversion: No
• Signal Splitting: Yes (to AUX or FlexLink)
• Channel-wise Routing: No
• Remote Control: No
  
  Dual Flexiverter (Devices are connected via FlexLink cable)
• Channels (all can be used at the same time): 128x128 MADI @ 48kHz64x64 MADI @ 96kHz32x32 MADI @ 192kHz plus what the AUX card provides
• Redundant Power Supply: up to 3x
• Battery-powered Operation (DC 12-15V): Yes
• Sample Rate Conversion: No
• Signal Splitting: Yes (to AUX or FlexLink)
• Channel-wise Routing: No
• Remote Control: No
  
  Flexiverter + Multiverter (Flexiverter connected to multiverter via FlexLink cable)
• Channels (all can be used at the same time): 448x448 from multiverter plus 128 x 128 MADI plus what the AUX card provides
• Redundant Power Supply: up to 3x
• Battery-Powered Operation (DC 12-15V): Yes
• Sample Rate Conversion: Yes (with SRC-64 card in Multiverter)
• Signal Splitting: Yes, to everything
• Channel-wise Routing: Yes, via MVR-64 (web, telnet or serial terminal)
• Remote Control: Yes, via MVR-64 (web, telnet or serial terminal)
  
  General
• Dimensions: 152x44x153mm (WxHxD) excluding connectors/buttons, 152x44x169mm (WxHxD) including device-side connectors/buttons
• Weight: 560g
• Power Consumption: +15V DC, 9W max (18W to power two devices via FlexLink)Triple-redundant input (2x DC, 1x via FlexLink)
• Cable Length: FlexLink 1m / 3ft. max. recommended
• Sample Rates: 32 / 44.1 / 48 / 64 / 88.2 / 96 / 128 / 176.4 / 192 kHz
• Channel Count: 128×128 @ 48kHz, 64×64 @ 96kHz, 32×32 @ 192kHz

Item Includes:

• 1x FLX-MADI Flexiverter Device
• 1x AC Power Cord (country specific)
• 1x User Manual

Warranty:

• 2 Year Manufacturer's Warranty