Cobalt Digital 9904-UDX-4K 12G/6G/3G/HD/SD UHD Up/Down/Cross Converter/Frame Sync with 2110-DC-01 SMPTE ST 2110 9904-UDX-INDIGO2110DC01

The award-winning Cobalt® 9904-UDX-4K 12G/6G/3G/HD/SD UHD Up/Down/Cross Converter/Frame Sync/Embed/De-Embed Audio Processor is Cobalt's next generation of advanced scaler/frame synchronizers for the openGear® platform.

The 9904-UDX-4K upconverts 12G/6G/3G/HD/SD to either UHD1 3840x2160 Square DIvision Multiplex (SDM) or Two-Sample Interleave (2SI) quad 3G-SDI based formats, or can output ST 2082 12G-SDI for single-wire 4K transport. With both 12G-SDI and quad 3G-SDI inputs, the 9904-UDX-4K can downconvert 12G and quad UHD. The 9904-UDX-4K provides an HDMI 2.0 output for economical 4K video monitoring. The 9904-UDX-4K offers numerous options, including SDR-to-HDR conversion and color correction.

The 9904-UDX-4K-DSP model provides the same functionality as the 9904-UDX-4K model, and additionally also offers a DSP-based platform that supports multiple audio DSP options, including Dolby® Real-Time Loudness Leveling automatic loudness processing, Dolby® E/D/D+ encode/decode, and Linear Acoustic® UPMAX™ automatic upmixing. Embedded audio and metadata are properly delayed and re-embedded to match any video processing delay, with full adjustment available for audio/video offset.

The high-density openGear® design allows for up to five 9904-UDX-4K to be installed in one 2RU openGear® frame. Card control/monitoring is available via DashBoard user interface or Cobalt's RESTful-based Reflex protocol.

Cobalt INDIGO 2110-DC-01 Option Included!
The Cobalt INDIGO 2110-DC-01 is a factory add-on option to Cobalt 9904-UDX-4K and 9905-MPx models. This option adds native SMPTE ST 2110 support for these cards, with multiple 25G Ethernet interfaces.

The INDIGO 2110-DC-01 circumvents the cumbersome, error-prone, and expensive prior solutions of multiple devices in the data path. Adding native ST 2110 interfaces to the audio/video processing elements, Cobalt is providing a cost-effective, easily manageable, integrated solution to this problem. Multiple boxes or processing elements are no longer needed in the data path, going back and forth between IP and SDI. By natively doing all the processing directly over IP, unnecessary complexity and cost is avoided.

Please Note! The 9904-UDX-4K is Dante capable with option +UDX-DANTE-16x16. This must be added per card at the time of purchase. Not field upgradeable!

+UDX-DANTE-16x16 Adds DANTE support of 16x16 channels to the 9904-UDX card but it cannot be used simultaneously with +HDR-TCHCLR and +LOGO licenses.

Features:

• High-density openGear® comprehensive UHD UDX solution
• Supports all popular formats: 480i, 576i, 720p, 1080i, 1080PsF, 1080p, 2160p. Can support/accept 3G Level A or Level B-DL input with output as Level A or B-DL (via UI control) and also support RGB 4:4:4 / YCbCr 4:4:4 (see Ordering Info for details).
• Full up/down conversion between HD/3G, ST 2082 12G-SDI single-wire, and SDM/2SI quad 3G-SDI based formats, with ST 2082 12G-SDI single-wire and quad 3G UHD available at both input and output
• Supports Square Division Multiplex (SDM) and Two-Sample Interleave (2SI) quad UHD formats
• 12G-SDI and quad 3G frame sync and user delay
• Supports Cobalt's Reflex (JSON) Protocols
• Full embedded audio processing with user delay offset and AES I/O
• Noise Reduction and Detail Enhancement provide image quality optimization
• Remote control/monitoring via DashboardT software, OGCP-9000 remote control panels, or Cobalt's RESTful-based Reflex protocol
• Hot-swappable
• Many options available including DANTE

Specifications:

• 12G/6G/3G/HD/SD-SDI Input/Outputs
  (6) 75? inputs (max)
  (8) 75? outputs (max)
• SDI Formats Supported: SMPTE ST2082-1,10, 424M, 292M, SMPTE 259M-C. All inputs/outputs 12G compliant and SDQS/2SI quad 3G compliant.
• Return Loss:
  > 15 dB up to 1.485 GHz
  > 10 dB up to 3 GHz
  > 7 dB up to 6 GHz
  > 5 dB up to 12 GHz
• Input Cable Length:
  45m Belden 1694A cable at 11.88 Gbps
  120m Belden 1694A cable at 2.97 Gbps
  240m Belden 1694A cable at 1.485 Gbps
  400m Belden 1694A cable at 270 Mbps
• Output Signal Level: 800 mV ±10%
• DC Offset: 0 V ± 50 mV
• Rise and Fall Time @ 11.88 Gbps: < 45 ps
• Alignment Jitter (12G/3G/HD/SD): < 0.3/0.3/0.2/0.2 UI
  
  Frame Sync Audio/VIdeo Delay
• Max offset: 20 frames
• Latency (min): 1 frame
  
  User Audio Delay Offset from Video
• Bulk delay control: -33 msec to +3000 msec.
• Per-channel delay controls: -800 msec to +800 msec
  
  AES Audio Inputs/Outputs
• (8) 75? coaxial ports (max); port direction assignable as inputs or outputs in groups of 4 ports.
  Note: Hardware rev -E and later has 8 AES ports; earlier versions have 4 port max.
  
  MADI Audio Inputs/Outputs
• (2) 75? coaxial ports (max)
  Note: Not all rear modules support full MADI I/O. MADI I/O is a function of Rear Module used and is available only on card with on rev C (or later) hardware with firmware supporting MADI I/O. See Rear Module illustrations for specific information.
  
  HDMI Input (Option -H2S only)
• HDMI 2.0 Input; mini connector
  
  HDMI Output
• HDMI 2.0 Output; type A standard connector
  
  GPIO
• 6 GPI (max); 2 GPO (max)
  Note: GPIO max capacity is a function of Rear Module used. See Rear Module Options tab for specific information.
  
  Frame Reference Input
• (2) reference from frame bus. SMPTE 170M/318M "Black Burst", SMPTE 274M/296M "Tri-Level"
  
  Frame Loading (Max. recommended number of 9904 cards supported per Frame Model)
  -OG3 Frame: (5) cards
  -HPF-9000 Frame: (5) cards
  -oGx Frame: (7) cards
  Note: In all cases, it is recommended to leave a 1RU gap above the frame and set frame Network Controller Card to run the frame cooling fans at full (max.) speed.

Item Includes:

• 1x Cobalt 9904-UDX-4K 12G/6G/3G/HD/SD UHD Up/Down/Cross Converter/Frame Sync/Embed/De-Embed Audio Processor
• 1x Cobalt INDIGO 2110-DC-01 factory add-on

Warranty:

• Five year warranty