Datacomm 45-8011-1P Connected Media Box with 15A/125V Duplex Power Receptacle - Outlet Box included 45-8011-1P

DataComm Electronics' 45-8017-1P Connected Media Box allows you to hide large power sources like the Samsung One Connect Box behind your TV. With the ability to add power solutions to this box you you can give your TV the wireless look you want.

Use trim ring when installing with a tilted, articulating, or full-motion TV mount. Use without trim ring when installing the TV directly on the wall with a fixed TV mount.

Tools Needed:
Flat Blade and Phillips Head Screwdriver
Drill is optional
Utility Knife
Four (4) Metal Wood Screws

Notes:
The Connected Media Box will fill an entire stud bay horizontally. Make sure the box will fit either below the TV mount or to the side and still be able to be covered by the TV. The outside dimensions of the trim ring are 17.50" W x 18" H.
Locate the panel in close proximity to a 110VAC for power requirements of amplifier or security panels. There is an outlet knockout i the bottom of the panel for the installation of an UL and/or ETL approved outlet or J-Box.
Have a licensed electrician install the outlet to meet current code requirements.
There is no fire rating on this panel, therefore, it should not be installed in fire rated walls.
The Connected Media Box is a distribution panel for low voltage wiring systems. It is not designed to be used as an AC power distribution panel. Use only Class 2 powered or passive devices.

Features:

• Mounting brackets to securely hold the One Connect Box
• Two large knockouts to allow access to USB ports
• Multiple knockouts for conduit up to 2" diameter
• Includes knockouts for a single gang J-Box power module
• Standard 1" x 6" hole pattern
• Can be mounted to front or inside of studs
• Flush with the wall
• Open trim ring to allow air flow
• UL Listed,15 Amp/125 Volt Duplex Receptacle
• Outlet box included

Specifications:

• Conforms to UL 2416 (Audio/Video, Information And Communication
• Technology Equipment Cabinet, Enclosure And Rack Systems)
• Material - UL Rated ABS Plastic
• Allows for two single gang JBoxes
• Open trim ring allows for air flow
• Mountable to the front or inside of studs
• Brackets and hook and loop strips for mounting power solutions

Item Includes:

• 1x Datacomm 45-8011-1P Connected Media Box with 15A/125V Duplex Power Receptacle
• 1x Outlet box