Fluke LIQ-KIT LinkIQ Cable Network Tester Kit - 10GBASE-T - PoE - ID-1-7 - Intellitone Probe - LinkIQ Series FLK-LIQ-KIT

The Fluke LIQ-KIT LinkIQ™ Cable+Network Tester is the solution to verify cable performance up to 10G and solve network connectivity problems.

LinkIQ™ validates cable performance using frequency-based measurements to calculate maximum bandwidth (10BASE-T to 10GBASE-T), which ensure that tested links meet performance requirements.

LinkIQ™ also provides nearest switch diagnostics including advertised data rate, switch name and port number and VLAN information, plus PoE testing and load test up to Class 8 (90 W).

Additional features include: Cable Toning, Port Blink, Remote Office Locators, and the ability to manage results via LinkWare PC.

Features:

• Validate Cable Performance up to 10GBASE-T via frequency-based measurements
• Get connected switch data rate, switch name, port number, & VLAN
• Detect the PoE class (1-8) and power, and perform a load test
• Cable diagnostics including length plus IntelliTone™, remotes 2-8
• Manage results and print reports from LinkWare™ PC

Specifications:

• Languages supported in UI: English (SW v1.0)
• 1 lbs 6 oz (624g)
• Battery: Type: Lithium-ion, 3.6 V, 6400 mAh, Life: 8 hours typical, Charge time: 4.5 hours, Charging temperature range: 0 °C to +40 °C
• Power Adapter: Input: 100 to 240 VAC ±10%, 50/60Hz, Output: 15 VDC, 2 A maximum, Class II
• Host Interface: USB type C
• Display: 800 x 480 color capacitive multi-touch
• Dimensions: 8.5 in x 4.5 in
• Operating Temperature: 0°C to 45°C
• Storage Temperature: -10°C to +60°C
• Operating Relative Humidity: 0 % to 90 %, 0°C to 35°C, 0 % to 70 %, 35°C to 45°C
• Operating Altitude: 4,000 m, 3,200 m with ac adapter
• Vibration: Random, 2 g, 5 Hz-500 Hz
• Drop: 1 m drop, 6 sides
  
  Active Network Diagnostics
• Diagnostic Protocols: Link Layer Discovery Protocol (LLDP), Cisco Discovery Protocol (CDP), Fast Link Pulses (FLP)
• Nearest Device Diagnostics (If available through diagnostic protocols): Switch Name, Port Number, VLAN Name, Advertised Data Rates, Advertised Duplex
• Power Over Ethernet Compatibility: IEEE 802.3af/at/bt, Hardware negotiation with signature resistance, Software negotiation with LLDP/CDP
• Power Over Ethernet Diagnostics: Advertised Power Class (0 to 8), Advertised Available Power, Powered Pairs, Diagnostics for both Single and Dual signatures
• Power Over Ethernet Measurements: Loaded Voltage (V), Loaded Power (W)
• Port Blink: Blink the light of the connected port
  
  Cable Test Specifications
• Test Port: Shielded 8-pin modular jack accepts 8-pin modular (RJ45) plugs.
• Commissioning Autotests: 10GBASE-T, 5GBASE-T, 2.5GBASE-T, 1000BASE-T, 100BASE-TX, 10BASE-T, Wire map Only.
• Test Speed: 6 seconds for lengths < 70 m
• Cable Types: Balanced twisted-pair cabling, Unshielded twisted-pair, Screened twisted-pair, 2-pair and/or 4-pair
• Wire Map-Only Tests: Document wire map, Length of each pair, Diagnose split pairs, User selectable T568A or T568B, User selectable crossover settings (Straight through, Half-crossover, Full-crossover), Test speed: 1 second for lengths < 120 m
• Length (Maximum): 305 m (1000 ft)
• Nominal Velocity of Propagation (NVP): User settable
• Tone Generator: Generates digital tones compatible with Fluke Networks IntelliTone probe. Generates analogy tones compatible with general analog probes.
• Remote ID Locators: Use remote ID terminations to identify up to 7 unique ports or office outlets

Item Includes:

• 1x Main Unit
• 1x Remote ID #1-7
• 1x RJ45-RJ45 patch cord
• 1x AC charger, RJ45/11 universal coupler
• 1xIntellitone(TM) Pro 200 Probe
• 1x Duffel bag carrying case