HDnP HDFU(T/Rx) 3G/HD-SDI 1 Video / 2 Data / 1 Audio Fiber Optic Converter Set HDP-HDFU-T-RX

HDnP HDFU (T/Rx)transmitter and receiver set transmits to fiber optical signal from HD/3G-SDI video, data and audio signals over 1 single fiber.

Applications:
HD or 3G SDI Video transmission
SMPTE297-2006 compatible optical to electrical or electrical to optical interface
Broadcasting, surveillance networks and CCTV security system

Features:

• Supports 1 channel 3G/HD-SDI video
• Supports SMPTE 424M, 292M, 259M and others
• Error free SDI pathological pattern operation
• Supports RS232, 422 & 485 serial data communication
• 75ohm BNC and ST optical connector

Specifications:

• Video
• Signal Format: SMPTE-424M, SMPTE-292M, SMPTE-259M
• Signal Level: 800 mV Vp-p ±50 mV
• Data rate: Up to 2.97Gbps
• Jitter*:
  < 1.0 UI - Timing Jitter
  < 0.2 UI - Alignment Jitter
• Electrical Connector: BNC (75?)
  Note: *Total Jitter at the end of Receiver output Maximum value.
  
  Data
• Data rate: DC to 115.2kbps
• Data Interface:
  Standard: RS422, RS485
  Option: RS232, RS422, RS485
• Connector: Standard Terminal Block
  
  
• Audio
• Bandwidth: 20Hz to 20kHz
• Signal to noise ratio: > 80dB
• Connector: Standard Terminal Block
  
  
• Optical
• Wavelength: 1310nm
• Transmitter:
  Output power: -7 ~ -3dBm
  Extinction Ratio 7dB
• Receiver
  Sensitivity -22dBm
  Maximum Overload 0dBm
• Distance (Typ.): 30km*
• Fiber Type: Single mode and Multimode
• Optical Connector: ST Connector
• Number of Fibers: 1
  Note: *The maximum distance coverage may be greater than these typical numbers, depending on fiber type, fiber bandwidth, connector, splicing losses, chromatic dispersion, environmental factors, etc.
  
  Mechanical
• Power Supply: DC12V, 1.5A Adaptors
• Operating Temperature: -4° to 167°F (-20° to 75°C)
• Humidity: 0 to 95% RH, non-condensing
• Dimensions (WxDxH): 5.81 x 7.11 x 1" (147.5 x 180.7 x 25.4mm)

Item Includes:

• 2x HDFU converters
• 2x DC12V Power supply, 1.5A Adapters
• 2x Mounting flanges