Juice Goose SCV-20001 UPS On Line Double Conversion Rackmount Battery Backup - 2000VA 1800 Watts SCV-20001

Juice Goose SCV-20001 UPS On Line Double Conversion Rackmount Battery Backup - 2000VA 1800 Watts SCV-20001

On Line, Double Conversion - Power Saving 2,000 VA / 1,800 Watt UPS
Juice Goose SCV-20001 advanced processor circuitry has an output power factor of 0.90 to provide higher performance and efficiency to critical applications. High efficiency circuitry converts 90% of available current (amps) into real work (watts), reducing equipment and operating costs.

True double conversion UPS architecture completely buffers connected loads from incoming disturbances on AC line and neutral. This design also provides unconditional voltage stability regardless of problems on the local utility grid.

Easy to read LCD display provides real-time indication of all major system parameters and status, including load and battery levels and fault signals. Communications options allow remote monitoring and management.

Run time can be increased by attaching optional external batteries. Batteries can be replaced without shutting down the UPS. All unit ship with NetAgent9 management software as well as floor stand and rack mounting hardware.

Made in America

Features:

• True Double-Conversion On-Line UPS
• Output Power Factor 0.9
• User-Friendly and Easy-Shift LCD Display
• Rack/Tower Design
• Programmable Power Management Outlets
• 50/60 Hz Frequency Converter Mode
• ECO and Advanced ECO Mode for Energy Saving
• Emergency Power Off Function (EPO)
• Hot-Swappable Battery Design

Specifications:

• Power Capacity (VA): 2,000
• Power Capacity (Watts): 1,800
• Rack Height: 2U
• Weight (Net, Lbs): 47
• Run Time, Full Load (Min): 3
• Run Time, Half Load (Min): 10
  
  Input
• Rated Volts Capacity: 100VAC-120VAC
• Low Transfer Capacity: Low Voltage 80 VAC/70 VAC/60 VAC/55 VAC ± 5 % (based on load percentage 100%-80% / 80%-70% / 70%-60% / 60%-0)
• Re-Transfer Capacity: Low Voltage Re-Transfer 85 VAC/75 VAC/65 VAC/60 VAC ± 5 %
• High Transfer Capacity: High Voltage 150 VAC ± 5 %
• Re-Transfer Capacity: High Voltage Re-Transfer 142 VAC ± 5 %
• Frequency Range: 50Hz/ 60Hz
• Power Factor: >0.99 @nominal voltage
  
  Output
• Output Voltage: 100*/110*/115*/120VAC
• AC Voltage Regulation: ±1%
• Frequency Range: 47 ~ 53 Hz or 57 ~ 63 Hz (Synchronized Range)
• Frequency Range: 50Hz ±0.5% or 60Hz ±0.5% (Bat. Mode)
• Current Crest Ratio (CF): 5:1 (max.)
• Harmonic Distortion(THDU): < 2% (Linear load) 8% max (Battery mode before shut down)
• Transfer Time:
  AC to DC: Zero
  Inv. to Bypass: 4 ms (Typical)
• Waveform (Battery Mode): Pure Sinewave
  
  Efficiency
• AC Mode: 88% (typical), 90% (peak)
• Battery Mode: 85% (typical), 88% (peak)
  
  Battery
• Battery Type: (4) 12V/9Ah
• Battery Time (Full Load): 2.7
• Typical Recharge: Time 4 hours recover to 90% capacity (for Non-LB models only)
• Charging Current (max.): 1 Amp
• Charging Voltage: 54.7 VDC ± 1%
  
  LCD Display
• Status: Load level 0-25%, 26-50%, 51-75% and 76-100%, Low Battery and Battery Good, Programmable Management Outlets working, UPS On-Line, UPS in Frequency Converter Mode, UPS On Bypass, Alarm Disabled Indicator and Battery Charger Working.
• Readings: Input Voltage and Frequency, Output Voltage and Frequency, Battery Backup Time (hours/minutes), Fault Indicator, Battery Voltage, Overload, and/or UPS Output is short circuited.
• Control/Select Buttons: Off/Enter - Turn UPS Off, Switch LCD Message, Mode Settings, Navigation Key, On/Mute + Select Button to switch to Bypass Mode.
  
  Audible & Visual Alarms
• Warning Indicators: Low battery, Overload, Battery Not Connected, Overcharge, Site Wiring Fault, EPO Enabled, Over Temperature, Charger Failure, Battery Fault, Bypass Out of Range and Bypass Frequency Unstable
  
  Weights & Dimensions
• Rack Mount: