Lynx Technik RPS A100 12V/8A Power Supply for RFR 1000-1 Rack Frame RPS A100

The Lynx RPS A100 US is an external in line "brick" power supply for use with the RFR 1000-1 rack frame. The DC connector is a 4 pin Molex MiniFit connector.2 x RPS A100 US power supplies can be used with one RFR 1000-1 for Redundant power protection. An IEC power cord with a USA AC plug is included

Features:

• 12VDC central power for RFR 1000-1 with up to 14 yellobriks
• 100W (max)
• Molex "Minifit" power connector
• Includes USA IEC power cord

Specifications:

• Output
• DC Voltage: 12V
• Rated Current: 8.3A
• Current Range: 0~8.3A
• Rated Power (max.): 100 W
• Ripple & Noise (max): 230mVp-p
• Voltage Tolerance: ±5.0%
• Line Regulation: ±1.0%
• Load Regulation: ±5.0%
• Setup, Rise Time: 2000ms, 30ms / 230VAC 2500ms, 30ms / 115VAC at full load
• Hold Up Time: 20ms / 230VAC 20ms / 115VAC at full load
  
  Input
• Voltage Range: 100~240VAC
• Frequency Range: 50~60Hz
• Efficiency (Typ): Level VI or CoC Tier II
• AC Current: 2A
• Inrush Current (max.): Cold start 80/115AC, 120/230VAC
  
  Protection
• Overload: 105 - 160% rated output power
• Protection Type: Hiccup mode, recovers automatically after fault condition is removed
• Overvoltage: 105 - 135% rated output voltage
• Protection Type: Shut down o/p voltage, re-power on to recover
• Over Temperature: Shut down o/p voltage, re-power on to recover
  
  Environment
• Working Temp.: 32 ~ +194°F
• Working Humidity: 20% ~ 90% RH non-condensing
• Storage Temp., Humidity: -20 ~ +85°C, 10 ~ 95% RH non-condensing
• Temp. Coefficient: ±0.03% / °C 32~113 °F)
• Vibration: 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
  
  Others
• MTBF: 368.75K hrs min. MIL-HDBK-217F
• Dimension: 137 x 59 x 34 mm (LxWxH)
• Packing: 450g
  
  Safety
• Safety Standards: UL62368-1, CSA C22.2 No. 62368-1, TUV EN62368-1, BSMI CNS14336, CCC GB4943.1, PSE J62368-1,AS/NZS
  60950.1, FCC, IRAM, RCM

Item Includes:

• 1x RPS-A100 US
• 1x USA IEC Power Cord