MuxLab 500702 LongReach HD-SDI Extender Kit MUX-500702
The LongReach HD-SDI Extender Kit (model 500702) features LED diagnostics for sync, signal detect and supports transmission of up to 2.97/3.0 Gbps uncompressed, un-encrypted digital video within television facilities and between professional video equipment. Up to 500 ft.
Features:
- Supports SDI-SMPTE 259M-C (270Mbps) HD-SDI-SMPTE 292M (1.485, 1.485/1.001 Gbps) HD-SDI-SMPTE 424M/425M (2.97/3.0 Gbps)
- Up to 500 ft via Cat5e/6 at all resolutions
- LED diagnostics; sync, signal detect
- Cast aluminium enclosure
- 2 year warranty
Specifications:
- Environment: SDI single link: SD, HD & 3G.
- Devices: Monitors or any equipment supporting SDI single link.
- Standard supported: SMPTE 259M (270Mb/s), SMPTE 292M & SMPTE 424M.
- Bit rates: 270Mb/s, 1.485Gb/s & 2.97 Gb/s (automatic selection).
- Format tested: SD: 525i, 59.94 Hz & 625i, 50 Hz
- HD: 1035i, 60 Hz & 1080i, 50 Hz & 1080p, 30 Hz & 1080i, 60 Hz &
- 1080p, 25 Hz & 1080i, 50 Hz & 1080p, 24 Hz & 720p, 60 Hz
- 3G: 1080p, 4:2:2, 10b, 60Hz & 1080p, 4:2:2, 10b, 50Hz &
- 720p, 4:4:4:4, 10b, 60Hz & 720p, 4:4:4:4, 10b, 50Hz &
- 1080p, 4:4:4:4, 10b, 30Hz & 720p, 4:4:4:4, 10b, 30Hz &
- 1080p, 4:4:4:4, 10b, 25Hz & 720p, 4:4:4:4, 10b, 25Hz &
- 1080p, 4:4:4:4, 10b, 24Hz & 720p, 4:4:4:4, 10b, 24Hz &
- 1080i, 4:4:4:4, 10b, 30Hz & 1080i, 4:4:4:4, 10b, 25Hz &
- 1080p, 4:4:4, 12b, 30Hz & 1080p, 4:4:4, 12b, 25Hz &
- 1080p, 4:4:4, 12b, 24Hz & 1080i, 4:4:4, 12b, 30Hz &
- 1080i, 4:4:4, 12b, 25Hz & 1080p, 4:2:2, 12b, 30Hz &
- 1080p, 4:2:2, 12b, 25Hz & 1080i, 4:2:2, 12b, 30Hz &
- 1080i, 4:2:2, 12b, 25Hz
- Indicators:
- Power
- SDI Sync
- RJ45 Link
- Connectors On each unit:
- One BNC 75 ohm female.
- One RJ45S for Cat5e/6 unshielded twisted pair.
- One power connector, 2mm.
- Maximum Distance:
- UTP Cat 5e: 500 ft (150 m) UTP Cat 6: 500 ft (150 m) for 500702
- Maximum distance applies for all format and speed between boxes. On
- the SDI side, the use of an equalizer at input and a clock regenerator at
- output allow to reach the maximum distance on coax.
- RJ45 Pin Configuration:
- Reverse Polarity Sensitive. Use EIA/TIA 568A or 586B straight-through wiring.
- RJ45 Link
- Pin 1 (R) Pin 2 (T)
- Pin 3 (R) Pin 6 (T)
- Pin 4 (R) Pin 5 (T)
- Pin 7 (R) Pin 8 (T)
- Cables (Not included): One straight Cat 5e/6 twisted pair cables required.
- Two 75 ohm coaxial cables with 75 ohm BNC required.
- Power Supply (Included): Two 100-240V/5-12VDC 15W power supplies with interchangeable blades for NA, Europe and UK.
- Power Consumption: Transmitter: 4 Watts Receiver: 8 Watts
- Dimensions 4.50" x 3.00" x 1.25" (11.4 x 7.6 x 3.2 cm)
- Weight 2.5 lb. (1.1 kg)
- Compliance Regulatory: FCC, CE, RoHS Flammability: 94V0
