Price: $2,126.00
Muxlab 500733 6G-SDI Extender Over UTP with Ethernet MUX-500733
The 6G-SDI Extender over UTP is a unique solution from MuxLab for extending SDI cameras or other SDI sources up to 4K resolution at up to 330ft (100m) using standard Cat5e/6 UTP cable.This multichannel extender supports up to 6Gbps of data throughput over the UTP link and allows for versatile combinations of sources, including one 6G-SDI source, two 3G-SDI sources or four HD-SDI sources, plus transmission of two Ethernet signals which may be used as return channels, and a bi-directional RS232 pass-through. The Ethernet port of the 500733 can be used for AV monitoring and talk-back, while the RS232 pass-through supports return of tally light, camera control unit (CCU) and control of end devices.The 6G-SDI Extender supports PoE, whereby the Transmitter may be powered by the Receiver. In addition Ethernet port1 also provides PoE power (PSE) in order to power an attached PoE (PD) device, such as a MuxLab Over IP PoE Transmitter or Receiver.Features:Extend up to 4K @ 30Hz to 330ft (100m) over Cat5e/6Multichannel support for one 6G-SDI source, two 3G-SDI sources, or four HD-SDI sourcesTransmits two Ethernet signals which may be used as a return channel for AV monitoring and talk-backSupports RS232 pass-through for remote control and for tally light and camera control unit (CCU)Supported modes: SMPTE 292M, SMPTE 296M, SMPTE 372M, SMPTE 424M, SMPTE 425MSupports all 6G channel configurations (1, 2 or 4 BNC)Automatic SDI Link recognition and configurationAutomatic activation of long reach mode 500ft (150m) when 3G signal detectedTransmitter may be PoE powered from ReceiverEthernet port1 can power a PoE deviceUSB interface for field upgradable firmware & diagnosticsEthercon connectivity and aluminum casting enclosure for ruggedized useSpecifications:Environment: 6G-SDI digital signal and Ethernet signal transmissionControl: Serial console emulation with USB interfaceReceiverConnectivity:4x BNC connectors for SDI outputs2x RJ45 for Ethernet ports1x Ethercon port for UTP Link cable between RX and TX unit1x 3-pin Terminal Block for RS2321x Mini USB for firmware updates status LEDS1x Locking Power Connector (5.5mm x 2.1mm)TransmitterConnectivity:4x BNC connectors for SDI inputs2x RJ45 for Ethernet ports1x Ethercon port for UTP Link cable between RX and TX unit1x 3-pin Terminal Block for RS2321x Mini USB for firmware updates status LEDS1x Locking Power Connector (5.5mm x 2.1mm)Enclosure Type & Dimensions: Aluminum casing, 4.3" x 4.3" x 1" (10.9 x 10.9 x 2.54cm), for TX and RXConnectors - power: Standard 2.1mm locking power jackPower: 2x 48V external power supply with US, UK and Euro bladesCompliance: FCC, CE, RoHSItem Includes:1x Receiver1x Transmitter
The 6G-SDI Extender over UTP is a unique solution from MuxLab for extending SDI cameras or other SDI sources up to 4K resolution at up to 330ft (100m) using standard Cat5e/6 UTP cable.
This multichannel extender supports up to 6Gbps of data throughput over the UTP link and allows for versatile combinations of sources, including one 6G-SDI source, two 3G-SDI sources or four HD-SDI sources, plus transmission of two Ethernet signals which may be used as return channels, and a bi-directional RS232 pass-through. The Ethernet port of the 500733 can be used for AV monitoring and talk-back, while the RS232 pass-through supports return of tally light, camera control unit (CCU) and control of end devices.
The 6G-SDI Extender supports PoE, whereby the Transmitter may be powered by the Receiver. In addition Ethernet port1 also provides PoE power (PSE) in order to power an attached PoE (PD) device, such as a MuxLab Over IP PoE Transmitter or Receiver.
Features:
Specifications:
Item Includes:
