MuxLab 500773-TX 4K HDMI and VGA over IP Wall Plate with PoE

The MuxLab 500773-TX HDMI/VGA over IP PoE Wall Plate Transmitter, UHD-4K is a two-gang wall plate transmitter which provides a convenient interface for HDMI and VGA input sources. It allows HDMI and VGA equipment to be extended up to 330ft (100m) from an Ethernet Switch via one (1) Cat5e/6 cable. The unit supports one (1) HDMI-In, one (1) VGA-In and one 2CH Audio-In, and supports resolutions up to 4K (3840x2160) @ 30Hz for HDMI and 1920x1200 @ 60Hz for VGA.

The input selection between HDMI and VGA inputs may be locally or remotely selected, and supports auto and manual switching modes with LED indicators.

This device may be used with the MuxLab 500758-RX and 500759-RX over IP Receivers, all managed via the 500811 Network Controller. The device supports PoE (PD) for easy installation.

Applications:
Commercial and residential AV systems
Classroom projector systems
Digital signage
Boardroom systems
Collaborative PC systems
Medical information systems

Note: When installed in an electrically noisy environment, an STP cable must be used. Also, cross-connection reduces the effective distance depending on the grade of twisted cable used.

Features:

• Selectable HDMI and VGA inputs
• HDMI 2.0b up to 4K @ 30Hz (4:4:4) and 4K @ 60Hz (4:2:0)
• VGA 1920x1200 @ 60Hz, with 2CH Audio-In
• HDCP 2.2 compliant
• Remotely managed over IP & locally managed via push button
• Auto and manual switching modes, with LED indicators
• Compatible with 500758-RX and 500759-RX over IP Receivers
• PoE powered
• Managed via Pro Digital Network Controller (500811), MuxLab Control Smartphone & Tablet App & 3rd Party Control Apps

Specifications:

• Environment: HDMI 2.0b
• Devices: TVs, monitors, projectors supporting HDMI.
• Signal Protocal/Standard: HDMI 2.0b and HDCP 2.2.
• Video Resolution HDMI: Up to 4K @ 30Hz (4:4:4) and 4K @ 60Hz (4:2:0)
• VGA: Up to 1920 x 1200 @ 60Hz
• Video Bandwidth: 300MHz
• Audio Bandwidth: 20Hz to 20KHz (2 CH)
• Network Bandwidth: 500Mbps (Typ), up to 800Mbps (Max).
• Network Requirement: 1G Network via PoE Ethernet Switch supporting IGMP and Jumbo Frames.
• Network Protocol: Multicast
• Compression: JPEG2000
• Latency: 16.7ms typ. (1 Frame), up to 33.4ms max. (2 frames )
• PoE: IEEE 802.3af
• Power Consumption: 3W
• Temperature Operating: 0° to 40°C Storage: -20° to 85°C
• Humidity: Up to 95% non-condensing
• Wall Plate Size: 2 Gang
• Dimensions: 5.00" x 4.53" x 1.65" (127 x 115 x 42 mm)
• Weight 1.17 lb (0.53 kg)
• Compliance Regulatory: FCC, CE, RoHS Flammability: 94V0
• Maximum Distance Cat5e/6: 330ft (100m) from Ethernet Switch. Note: When installed in an electrically noisy environment, an STP cable must be used. Also, cross-connection
• reduces the effective distance depending on the grade of twisted cable used.
  
  Connectors
• (1) HDMI input connector for Audio/Video
• (1) VGA input 15-Pin DSUB connector for Video
• (1) 3.5mm input jack for 2CH Audio
• (1) RJ45S for Ethernet connection
• (1) 2.1mm locking power connector, for optional use since this device supports PoE (Pd)
  
  MRJ45 Pin Configuration
• Pin 1 ® Pin 2 (T)
• Pin 3 ® Pin 6 (T)
• Pin 4 ® Pin 5 (T)
• Pin 7 ® Pin 8 (T)
  
  Power Source
• This device supports PoE (PD), an external power supply is not included. It is intended to be powered via a PoE (PSE) Ethernet Switch. If required, an optional power supply (500993) may be purchased separately.

Warranty:

• 3 years