MuxLab 500777-RX-WH HDMI/USB over IP PoE WP Receiver - UHD-4K (White) 500777-RX-WH

The Muxlab 500777-RX-WH HDMI/USB over IP PoE Wall Plate Receiver, UHD4K installs in a double-gang wall box to provide a convenient interface for HDMI display equipment and USB connectivity to manage Smart White Boards and other USB based devices. The unit has one (1) HDMIOut, one (1) Audio-Out, two (2) USB 2.0 Type-A ports, two (2) USB 1.1 type-A ports, and one Ethernet Port. It supports video up to 4K @ 30Hz (4:4:4) and 4K @ 60Hz (4:2:0). The HDMI/USB over IP PoE Wall Plate Receiver, UHD-4K allows HDMI and USB equipment to be extended up to 330ft (100m). The unit supports an RS232 port plus a Directional IR port to manage remote devices. The device may be powered via a PoE enabled 1Gig Ethernet Switch.

Applications:
Commercial and residential AV systems
K-6 and K-12 classroom AV systems
Digital signage
Boardroom systems
Collaborative PC systems
Medical information systems

Features:

• HDMI 2.0b up to 4K @ 30Hz (4:4:4) and 4K @ 60Hz (4:2:0)
• Audio-Out capability
• Supports two (2) USB 2.0 and two (2) USB 1.1 Type-A ports
• Extend HDMI, 2CH Audio, and USB up to 330ft (100m) over Cat5e/6 cable
• HDCP 2.2 compliant
• Compatible with 500777-TX, 500759-TX, 500770-TX and 500771-TX over IP Transmitters
• RS232 and Directional IR for remote control of end-devices
• PoE powered
• Managed via Pro Digital Network Controller (500811), MuxControl App & 3rd Party Control Apps

Specifications:

• Environment: HDMI and USB connectivity.
• Devices: Blu-Ray, projectors, monitors, TV, PC, laptops, servers, and Smart White Boards.
• Bandwidth: 300MHz
• Signals: HDMI 2.0b (4K/30 4:4:4 & 4K/60 4:2:0), USB 2.0, CEC and HDCP 2.2.
• Connectors:
  One (1) HDMI receptacle
  Two (2) USB 2.0 Type A connectors
  Two (2) USB 1.1 Type A connectors
  One (1) RJ45S for Ethernet connectivity
  One (1) 3-Pin Phoenix connector for RS232
  One (1) 3.5mm jack for Directional IR
  One (1) 3.5mm jack for Audio-Out
  One (1) 2.1mm jack for power (not required when PoE is available)
• Note: Cables not included.
• Maximum Distance: Based on a maximum length of 6.6ft (2m) of HDMI cable per end. Cat5e/6: 330ft (100m)
• Note: When installed in an electrically noisy environment, an STP cable must be used. Also, cross-connection reduces the effective distance depending on the grade of twisted cable used.
• Latency: Typical one (1) frame (16ms)
• Compression: JPG2000
• Bandwidth: Up to 500Mbps
• Network Requirement: 1 Gig Ethernet with IGMP, Jumbo Frames and PoE
• RJ45 Pin Configuration: Reverse Polarity Sensitive. Use EIA/TIA 568A or 586B straight-through wiring.
• RJ45 Link:
  Pin 1 ® Pin 2 (T)
  Pin 3 ® Pin 6 (T)
  Pin 4 ® Pin 5 (T)
  Pin 7 ® Pin 8 (T)
• Power Source: This device supports PoE (PD), an external power supply is not included. It is intended to be powered via a PoE (PSE) Ethernet Switch. If required, an optional power supply (500993) may be purchased separately.
• PoE: IEEE 802.3af
• Power Consumption: 6W
• Operating Temperature: 32° to 104°F (0° to 40°C)
• StorageTemperature: -4° to 185°F (-20° to 85°C)
• Humidity: Up to 95% non-condensing
• Dimensions: 5.03 x 4.53 x 1.66" (128 x 115 x 42mm)
• Weight: 1.35 lb (0.61 kg)
• Compliance Regulatory: FCC, CE, RoHS Flammability: 94V0

Warranty:

• Warranty 3 years