OMC Tech 10.3Gbps LC Duplex SFP+ Multimode Transceiver - 328 Foot Range SY85A0-X3ATNU

The SY85A0-X3ATNU transceiver from OMC Tech is a small form factor pluggable module for serial optical data communications such as IEEE 802.3ae 10GBASE-SR/SW. It has the SFP+ 20-pin connector to allow hot plug capability. It is designed expressly for high-speed communication applications that require rates up to 10.3Gb/s, and to be compliant with SFF-8472 SFP+ MSA. Digital diagnostic functions are available via an I2C. This module is designed for multi-mode fiber (MMF) and operates at a nominal wavelength of 850nm.

Transmitter Section
The transmitter consists of a high-performance 850nm Vertical Cavity Surface Emitting Laser (VCSEL) in the optical subassembly (OSA), which is housed within a plastic barrel package. In addition, this component is also a class 1 laser that is compliant with International Safety Standard IEC-60825-1:2014. It complies with EN60825-1:2014/A11:2021 and FDA 21 CFR 1040.10 and 1040.11.

Receiver Section
The receiver consists of a GaAs PIN photodiode coupled to a high-sensitivity transimpedance amplifier (TIA) in an OSA. This OSA combination is mated to a post-amplifier IC that provides the post amplification SD (Signal Detection) or LOS (Loss of Signal) indication circuit, which provides the logic high state output when an unusable input optical signal level is detected.

Please Note: Image is for reference only

Features:

• Single +3.3V Power Supply
• Compliant with SFP+ MSA
• Compliant with IEEE802.3by 25GBASE-SR/SW
• Compliant with SFF-8472 Digital Diagnostic Function
• Class 1 Laser International Safety Standard IEC 60825-1:2014 Compliant
• Complies with EN60825-1:2014/A11:2021 and FDA 21 CFR 1040.10 and 1040.11
• Built-in CDR on both Transmitter and Receiver
• Support the Digital Diagnostic Monitor interface
• Hot-pluggable SFP+ footprint
• Metal enclosure, for lower EMI
• RoHS Compliant

Specifications:

Performance Specifications
• Supply Voltage: 0V - 4V
• Storage Temperature: -40°F - 185°F (-40°C - 85°C)
• Operating Case Temperature: Commercial: 32°F - 158°F (0°C - 70°C)
• Data Rate: 9.95Gbps - 10.5Gbps
• Supported Link Length on OM4 MMF: 328ft (100m)
• Supply Current: 300mA
• Power Dissipation: 1000mW
  
  TX Optical & Electrical Characteristics
• Supply Voltage: 3.15V, 3.3V, 3.45V
• Data Differential Input Voltage: 120mV - 1200mV
• Input High Voltage: 2.0V - Vcc
• Input Low Voltage: Gnd - 0.8V
• Output Optical Power: -7dBm - 1dBm
• Optical Modulation Amplitude: -6.4dBm - 3dBm
• Center Wavelength: 840nm, 850nm, 860nm
• Spectral Width (RMA): 0.45nm
• Extinction Ratio: 3dB
• Relative Intensity Noise: -128dB/Hz
• Transmitter and Dispersion Penalty: 3.9dB
  
  RX Optical & Electrical Characteristics
• Supply Voltage: 3.15V, 3.3V, 3.45V
• Data Differential Output Voltage: 350mV - 700mV
• Receiver LOS/SD Output Voltage-High: 2.0V - Vcc
• Receiver LOS/SD Output Voltage-Low: 0.8V
• Maximum Receiver Power: -1dBm
• Receiver Sensitivity: -9.9dBm
• Optical Center Wavelength: 840nm - 860nm
• Optical Return Loss: -12dB
• Signal Detect-Asserted: -9.9dBm avg.
• Signal Detect-Deasserted: -25dBm avg.
• Signal Detect-Hysteresis: 0.5dB

Item Includes:

• 1x SY85A0-X3ATNU 10.3Gbps LC SFP+ Duplex Multimode Transceiver

Warranty:

• 1 Year Limited Warranty