Triplett POE3000 In-Line PoE Tester Pro - 2x RJ45 PSE & PD Test Jacks POE3000

The Triplett POE3000 In-Line PoE Tester Pro is a valuable tool that streamlines the installation and troubleshooting of PoE (Power over Ethernet) system devices. It simplifies the process by offering various detection capabilities. The tester's 4 LEDs indicate whether it complies with IEEE802.3af or 802.3at/bt standards. It can detect PSE (Power Sourcing Equipment) type/class, power source, polarity, voltage, current, power, and determine if it is End Span (1/2, 3/6), Midspan (4/5, 7/8), or across all 4 pairs.

For added convenience, the tester can differentiate between standard PoE (36 to 60V) and non-standard (11 to 60V) passive PoE, making it suitable for various PoE setups. It also includes 2 yellow LEDs to indicate reversed polarity for power type.

The POE3000 provides inline power level monitoring that alternates between displaying Voltage, Current, and Power. It incorporates a step button for selecting specific data to display. No batteries are required as it utilizes system power when connected to a device.

Features:

• Passes Thru Voltage and Data: This in-line PoE tester not only detects various PoE parameters but also allows the passage of both voltage and data, ensuring seamless power and data transmission in your PoE system.
• Streamlines Installation and Troubleshooting: Helps to speed up the installation and troubleshooting of PoE system devices.
• IEEE802.3af/802.3at/bt Detection: 4 LEDs indicate IEEE802.3af or 802.3at/bt standard compliance.
• Comprehensive Detection: Detects PSE-type/class, power source, polarity, voltage, current, power, and determines End Span, Midspan, or across all 4 pairs.
• Standard vs. Non-Standard PoE: Determines standard PoE (36 to 60V) or non-standard (11 to 60V) passive PoE.
• Polarity Reversal Indication: 2 Yellow LEDs indicate reversed polarity for power type.
• Inline Power Level Monitoring: Alternates between displaying Voltage, Current, and Power with a step button for data selection.
• No Battery Required: Uses system power when connected to a device.
• Complete Package: Includes the Inline PoE Tester Pro for your convenience.

Specifications:

• Connector Interface:
• 2X RJ45 (PSE & PD Test Jacks)
  
  Voltage Range:
• Standard PoE: 36 to 60V; Non-Standard: 11 to 60V
  
  Max Current (based on 50V):
• 990mA/50W per mode; Total 2A/100W
  
  Function Selection Mode:
• T Mode: for detecting PSE status
• N Mode: for determining non-standard PoE + inline testing
• I Mode: for testing & monitoring real-time power status
  
  Display:
• 4 LEDs indicate IEEE802.3af or 802.3at/bt standard, Dual 7-digit LEDs indicate power source either end (A) Span (1/2, 3/6) or Mid (B) span (4/5, 7/8) or both for bt, 2 Yellow LEDs indicate reversed polarity for power type. Display alternates between Voltage, Current and Power
  
  Step Button:
• For selecting specific data to display
  
  Power:
• Uses system power when connected to a device

Warranty:

• 1 Year