Price: $230.40
Tripp Lite B126-2X2 HDMI Over Cat5/Cat6 2x2 Matrix Extender Splitter Switch HDMI RJ45 F/F TAA TRL-B126-2X2
The B126-2X2 2-port HDMI over Cat5/Cat6 Matrix Splitter Switch works with Tripp Lite remote receivers to share one or more HDMI sources between multiple projectors, monitors or televisions. It's ideal for digital signs, trade shows, presentations, retail and other applications where the video sources are located farther than conventional cables allow or that require multiple displays connected to one source. It uses HDMI cable(see Tripp Lite's P568-Series) to connect to the sources and Cat5e/6 cable to transmit to the remote monitors (for best results, use 24 AWG solid-wire Cat5e/6 cable, such as Tripp Lite's N202-Series). Any video source can be routed to any monitor, or you can send the same source to multiple monitors. Switch between inputs via pushbuttons, RS-232 serial or the included remote control.When used with Tripp Lite's B126-1A0 or B126-1A0-WP-1 active remote receivers, the switch can extend a 1080i(60 Hz) signal up to 175 feet or a 1080p signal(60 Hz) up to 125 feet. With a B126-1P0 or B126-1P0-WP-1 passive remote receiver, it can extend a 1080i(60 Hz) signal up to 75 feet and a 1080p(60 Hz) signal up to 50 feet. Add up to three B126-110 remote repeaters to each channel to fully extend the signal range or add more displays.In addition to crystal-clear video, the B126-2X2 delivers full, rich stereo. Easy to set up with no software or drivers to install. Mounts to a wall, rack or pole using the included hardware.Features:Extends High-Definition SignalsExtends a 1080i(60 Hz) signal up to 175 ft. and a 1080p(60 Hz) signal up to 125 ft. with each optional B126-110 remote repeaterExtends a 1080i(60 Hz) signal up to 175 ft. and a 1080p(60 Hz) signal up to 125 ft. with B126-1A0 or B126-1A0-WP-1 active remote receiverExtends a 1080i(60 Hz) signal up to 75 ft. and a 1080p(60 Hz) signal up to 50 ft. with B126-1P0 or B126-1P0-WP-1 passive remote receiverAdd up to 3 remote repeaters on each channel for maximum signal rangeConnects to next link in the chain with one Cat5e/6 cable(for best results, use 24 AWG solid-wire Cat5e/6 cable, such as Tripp Lite's N202-Series)Supports the Latest Video and Audio ResolutionsWorks with all operating systems and HDMI video sourcesSupports HD resolutions up to 1080p(60 Hz)Supports stereo audioSupports 24-bit True Color(8 bits per channel) and HDCPEasy to Set Up and UseRoute any video display to any monitor, or route the same display to multiple monitorsPlug-and-play engineering-no software or drivers to download and installConnects quickly to sources with HDMI cable, such as Tripp Lite's P568-SeriesLEDs indicate at a glance when the unit is receiving power and an HDMI signal from the sourceIncluded mounting hardware lets you install the units on a wall, rack or poleTAA-CompliantCompliant with the Federal Trade Agreements Act(TAA) for GSA Schedule purchasesSpecifications:AC Adapter: Input: 100-240V, 50/60Hz, 0.5A; Output: 5V, 2A, 4.5 ft.PHYSICALUnit Dimensions (hwd / in.): 1.20 x 5.0 x 3.90Included Mounting Accessories: YesColor: BlackENVIRONMENTALOperating Temperature Range: 0 to 40 C (32 to 104 F)Storage Temperature Range: -20 to 60 C (-4 to 140 F)Relative Humidity: 20 to 90%COMMUNICATIONSMax 1024 x 768 Range (ft): 175Max 480P Range (ft): 175Max 1440 x 900 Range (ft): 175Max 1080i Range (ft): 175Max 1080P Range (ft): 125Max 480i Range (ft): 175Max 640 x 480 Range (ft): 175Max 800 x 600 Range (ft): 175Max 1600 x 1200 Range (ft): 175Max 720P Range (ft): 175CONNECTIONSPorts: 2Side A - Connector 1: (2) HDMI (FEMALE)
The B126-2X2 2-port HDMI over Cat5/Cat6 Matrix Splitter Switch works with Tripp Lite remote receivers to share one or more HDMI sources between multiple projectors, monitors or televisions. It's ideal for digital signs, trade shows, presentations, retail and other applications where the video sources are located farther than conventional cables allow or that require multiple displays connected to one source.
It uses HDMI cable(see Tripp Lite's P568-Series) to connect to the sources and Cat5e/6 cable to transmit to the remote monitors (for best results, use 24 AWG solid-wire Cat5e/6 cable, such as Tripp Lite's N202-Series). Any video source can be routed to any monitor, or you can send the same source to multiple monitors. Switch between inputs via pushbuttons, RS-232 serial or the included remote control.
When used with Tripp Lite's B126-1A0 or B126-1A0-WP-1 active remote receivers, the switch can extend a 1080i(60 Hz) signal up to 175 feet or a 1080p signal(60 Hz) up to 125 feet. With a B126-1P0 or B126-1P0-WP-1 passive remote receiver, it can extend a 1080i(60 Hz) signal up to 75 feet and a 1080p(60 Hz) signal up to 50 feet. Add up to three B126-110 remote repeaters to each channel to fully extend the signal range or add more displays.
In addition to crystal-clear video, the B126-2X2 delivers full, rich stereo. Easy to set up with no software or drivers to install. Mounts to a wall, rack or pole using the included hardware.
Features:
Specifications:
