Tripp Lite B140-002-DD 2-Port Dual Display DVI over Cat5/Cat6 Extender Splitter Video Transmitter - 60Hz Up to 200 Ft B140-002-DD

Tripp Lite B140-002-DD 2-Port Dual Display DVI over Cat5/Cat6 Extender Splitter Video Transmitter - 60Hz Up to 200 Ft B140-002-DD

Tripp Lite's B140-002-DD takes in two PC DVI source video signals, and splits each to two remote monitors. Passive, non-powered Receivers allow distances up to 50ft @ 1920x1200 resolution, or 100ft @ 1024x768 resolution, over solid conductor Cat6 cable. Active, powered Receivers extend the distance to 150ft @ 1920x1200, and 200ft @ 1024x768 (receivers purchased separately). Additional monitors can be daisy-chained (up to 3) on each channel, allowing four monitors per channel, by using Tripp Lite B140-110 Repeater/Extender. Tripp Lite recommends Cat6 Solid Conductor patch cables for Digital Extenders (DVI/HDMI). Tripp Lite N202-series patch cables are designed specifically for these types of devices...pre-terminated, Solid Conductor Cat6 patch cables up to 200ft. Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.

Features:

• Transmits a DVI-D Single-Link signal from a set of Dual DVI inputs to two sets of Dual Displays
• A B140-Series remote receiver is needed at each monitor
• For longer distances: Use a B140-1A0 or B140-1A0-WP active receiver to extend a 1920 x 1200 @ 60Hz signal up to 150 ft. from the transmitter (or a 1024 x 768 @ 60Hz signal up to 200 ft. from the transmitter)
• For shorter distances: Use a B140-1P0 passive receiver to extend a 1920 x 1200 @ 60Hz signal up to 50 ft. from the transmitter (or a 1024 x 768 @ 60Hz signal up to 100 ft. from the transmitter)
• Use 24 AWG, Solid Wire Cat5e/6 cable, such as Tripp LiteÂ’s N202-Series to achieve maximum distance and resolution
• Further expand the range and number of monitors by adding B140-110 remote repeater units
• Add up to three repeaters on each of the B140-002-DD channels, for a total of 4 displays per channel (An active receiver should be the last unit in a channel)
• A 1920 x 1200 @ 60Hz signal can be extended up to 125 ft. for each repeater added into a channel (or up to 175 ft. for a 1024 x 768 @ 60Hz signal)
• DVI 1.0 compliant
• HDCP compatible
• Mounting hardware included that allows the unit to be wall-mounted, rackmounted, or pole mounted
• Plug and play; no software or drivers required
• Compatible with all operating systems
• Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases

Specifications:

• AC Adapter: Input: 100-240V, 50/60Hz, 0.5A; Output: 5V, 2A
• Unit Dimensions (hwd / in.): 1.2 x 5 x 3.6
• Unit Dimensions (hwd / cm): 3.05 x 12.7 x 9.14
• Unit Weight (lbs.): 0.8
• Unit Weight (kg): 0.36
• Included Mounting Accessories: Y
• Max 1024 x 768 Range (ft): 200
• Max 480P Range (ft): 200
• Max 1440 x 900 Range (ft): 150
• Max 1080i Range (ft): 150
• Max 1080P Range (ft): 150
• Max 480i Range (ft): 200
• Max 640 x 480 Range (ft): 200
• Max 800 x 600 Range (ft): 200
• Max 1600 x 1200 Range (ft): 150
• Max 720P Range (ft): 150
• Ports: 2
• Side A - Connector 1: (2) DVI-I DUAL-LINK (FEMALE) (WIRED TO DVI-D SINGLE-LINK)
• Side B - Connector 1: (2) RJ45 (FEMALE)
• Product Warranty Period (Worldwide): 1-year limited warranty

Item Includes:

• B140-002-DD Extender / Splitter Transmitter Unit
• External Power Supply with NEMA 1-15P Plug ( Input: 100-240V, 50/60Hz, 0.5A; Output: 5V, 2A )
• Mounting Hardware
• Owner's Manual

Warranty:

• 1 Year