Tripp Lite PDU3EVN6H50B 3-Phase PDU Monitored 200/208/240V 14.5kW 42 C13- 6 C19 LCD TAA PDU3EVN6H50B

The Tripp Lite PDU3EVN6H50B 14.5kW 3-Phase Monitored PDU provides real-time remote monitoring of voltage, frequency and load levels via built-in network connection. Recommended for IT and industrial applications, it features 48 outlets-42 C13, 6 C19-with included plug-lock insert sleeves to prevent cables from becoming accidentally disconnected. A six-foot cord with Hubbell CS8365C input plug connects the 3-phase PDU to a compatible AC power source, generator or protected UPS.

The built-in Java-free HTML5-based LX Platform network interface enables full remote access for PDU status monitoring and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include IPv4, IPv6, HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP.

A color touchscreen LCD lets you toggle between menus to monitor input current level per phase and output current per load bank with ±1% billing-grade accuracy, environmental sensor data and network information. It also generates a unique QR code to allow access to the PDU through a mobile device.

The 0U PDU mounts vertically in racks using the included toolless mounting buttons or the included rack-mounting brackets. Use the included PDUMVROTATEBRKT kit to install the unit with outlets facing the rear for better airflow or equipment access.

Features:

Distributes and Monitors Network-Grade AC Power
• 14.5kW 208/240V monitored PDU with 3-phase input
• Hubbell CS8365C plug with 6 ft. cord connects to compatible AC power source
• Firmware upgrades support future product enhancements
  
  48 Outlets Distribute AC Power
• 42 C13 and 6 C19 split into 3 separately breakered load banks
• Plug-lock insert sleeves prevent cables from becoming accidentally disconnected
  
  Color Touchscreen LCD
• Reports network data, including IP address, input current level per phase and output current per load bank with ±1% billing-grade accuracy
• Generates unique QR code for read-only access to PowerAlertr Device Manager via mobile device
• Full access available by logging into PowerAlert Device Manager via browser as user with read/write credentials
  
  Built-In HTML5-Based LX Platform Interface
• Allows full remote access for power monitoring with email notifications via secure web browser, SNMP, telnet or SSH
• Supports 10/100 Mbps auto-sensing for communication with an Ethernet network
• Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities
• No Java required
  
  Broad Communications Compatibility
• Supports IPv4, IPv6, HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP
• Supports automatic and manual assignment of IP address
  
  Easy 0U Installation in EIA-Standard 19 in. Racks
• Mounts vertically using included toolless buttons or rack-mounting brackets
• Included PDUMVROTATEBRKT allows mounting with rear-facing outlets
  
  TAA-Compliant
• Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases

Specifications:

Overview
• UPC Code:037332195340
• PDU Type:Monitored
  
  Output
• Output Capacity Details:14.5kW (240V), 12.6kW (208V) total capacity; 20A max per breakered outlet bank; 16A max per C19 outlet; 12A max per C13 outlet
• Frequency Compatibility:50 / 60 Hz
• Output Receptacles:(42) C13; (6) C19
• Output Nominal Voltage:208; 240
• Overload Protection:3 20A circuit breakers, 1 per outlet bank
  
  Input
• PDU Input Voltage:208; 240
• Recommended Electrical Service:50A 208/240V with Hubbell CS8365C outlet
• Maximum Input Amps:35
• PDU Plug Type:HUBB