Tripp Lite PDUMV20NETLX 1.9kW Single-Phase Switched PDU with 20A LX Platform Interface - 120V Outlets - 10 Foot Cord PDUMV20NETLX

Tripp Lite PDUMV20NETLX 1.9kW Single-Phase Switched PDU with 20A LX Platform Interface - 120V Outlets - 10 Foot Cord PDUMV20NETLX

The Tripp Lite PDUMV20NETLX 1.9kW Single-Phase Switched PDU provides advanced network control and remote power monitoring with the ability to turn on, turn off, reboot or lock out power to each outlet. Recommended for IT and industrial applications, the vertical PDU features 24 switched NEMA 5-15/20R outlets with included cord retention brackets to prevent cables from becoming accidentally disconnected. A 10-foot cord with NEMA L5-20P plug connects the PDU to a compatible AC power source, generator or protected UPS.

The built-in Java-free HTML5-based LX Platform network interface enables full remote access for PDU status monitoring and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include IPv4, IPv6, HTTP, HTTPS, SMTP, SNMPv1, SNMPv2c, SNMPv3, Telnet, SSH, FTP, DHCP and NTP.

A digital ammeter allows you to monitor the total load in real time to ensure it remains well below maximum capacity with no danger of overload. The vertical PDU mounts in 0U of space in EIA-standard 19-inch racks using the included toolless mounting buttons or the included rack-mounting brackets. Use the included PDUMVROTATEBRKT kit to install the unit with outlets facing the rear for better airflow or equipment access.

Features:

• 1.9kW 120V single-phase switched 0U PDU
• 24 individually controllable NEMA 5-15/20R outlets
• Built-in LX Platform interface for 24/7 remote access
• Auto Probe for Autonomous Device Management
• Digital ammeter for on-site load monitoring in real time
• NEMA L5-20P input with 10 ft. AC power cord and 5-20P adapter
• To enable the Auto Probe feature, this product requires LX firmware update 15.5.2 or later to be installed
• 2-year limited warranty

Specifications:

• Output
• Frequency Compatibility: 50 / 60 Hz
• Output Capacity Details: 2.03kW (127V), 1.92kW (120V), 1.6kW (100V) / 20A total capacity (Agency de-rated to 16A); 16A max per outlet
• Output Receptacles: (24) 5-15/20R
• Output Nominal Voltage: 100; 120; 127
• Overload Protection: n/a
• Customized Load Management Receptacles : Each outlet is individually controllable via remote interface
  
  Input
• PDU Input Voltage: 100; 120; 127
• Recommended Electrical Service: 20A 120V
• Maximum Input Amps: 20
• Maximum Input Amps Details: Agency de-rated to 16A continuous
• PDU Plug Type: NEMA 5-20P; NEMA L5-20P
• Input Phase: Single-Phase
• Input Cord Length (ft.): 10
  
  User Interface, Alerts & Controls
• Front Panel LCD Display: Digital meter reports PDU output current in amps
• Front Panel LEDs: 24 power availability LEDs confirm power off/on status for each built-in outlet. LX Platform Interface: Network Link/Activity Status LED (Yellow), Network Speed LED (Green); LX Platform status LED (Green)
• Switches: Push button to rotate digital display and view IP address. LX Platform Interface: Recessed reset switch for interface reboot and factory reset
  
  Physical
• Shipping Dimensions (hwd / in.): 4.00 x 6.00 x 72.50
• Shipping Weight (lbs.): 15.50
• Unit Dimensions (hwd / in.): 70 x 2.19 x 2.65
• Unit Weight (lbs.): 8.5
• Form Factors Supported: 0U vertical rackmount; includes rackmount brackets. Supports toolless mounting in button-mount compatible racks
• PDU Form Factor: Vertical (0U)
  
  Environmental
• Storage Temperature Range: -15 to 60C / 5 to 140F
• Relative Humidity: 5-95% non-condensing
  
  Communications
• Network Monitoring Port: RJ45 Network port, RJ45 Config/Console Access port; USB A port supports a variety of Envirosense2 environmental and control modules. See Acces