Tripp Lite SU2200RTXLCDN SmartOnline 120V 2.2kVA 1.8kW Double-Conversion UPS 2U Rack/Tower Extended Run TRL-SU2200RTXLCD

The SU2200RTXLCDN SmartOnline 120V 2.2kVA 1.8kW On-Line Double-Conversion UPS provides battery backup and AC power protection against blackouts, brownouts, power surges and line noise that can damage electronics or destroy data. It converts AC input to DC power, and then converts DC to fully regulated sine wave AC output with +/-2% voltage regulation in online and battery modes.Featuring six NEMA 5-15/20R outlets in two switchable numbered load backs, as well as one L5-20R outlet and a 5-20P input, the SU2200RTXLCDN has an internal battery that provides 12 minutes of support at half load and four minutes at full load. Adding external battery packs, such as BP48V24-2U (sold separately), provides extended runtime.The pre-installed SNMPWEBCARD accessory card permits remote management, including reboots, configuration, updates and activity logs. An interactive front-panel LCD interface displays operating conditions and diagnostic data, such as load, voltage and battery levels. You can set operating modes to reflect your protection priorities, including an optional economy mode that saves heat output and energy costs.EMI/RFI noise filtering improves your equipment's performance and prevents damage. A 570-joule surge suppression rating protects your equipment from harmful power surges. With Tripp Lite's included POWERALERT12 software, the SU2200RTXLCDN enables safe unattended system shutdown and file saves in case of a prolonged power failure.

Features:

• Protects Mission-Critical Rackmounted Equipment
• Provides fully regulated sine wave AC output for servers, network storage devices and telecom hardware
• +/-2% voltage regulation in online and battery modes
• Selectable 100/110/120/127V output voltage
• 6 NEMA 5-15/20R and 1 L5-20R outlets
• 10 ft. power cord with NEMA 5-20P input
• 570-joule surge suppression rating Reliable Battery Backup with Expandable Runtime
• Supports half load for 12 min. and full load for 4 min.
• Zero transfer time suitable for advanced network applications
• Expandable runtime with optional external battery packs, such as Tripp Lite's BP48V24-2U
• Restarts automatically after lengthy power outages Included SNMP/Web Capability
• Pre-installed SNMPWEBCARD permits remote management of UPS, including reboots, configuration, updates and activity logs Switchable Numbered Load Banks
• Outlets are divided into 2 numbered load banks, each of which may be individually powered on and off remotely to reset or reboot connected equipment Interactive LCD Screen
• Reports detailed status information, including load, voltage and battery levels
• Offers advanced configuration and setup options, including output voltage and operating mode EMI/RFI Line Noise Filtering
• Removes electromagnetic and radio frequency interference that can disrupt or damage equipment's performance Audible Alarm
• Indicates startup/shutdown, power failure, low battery, overload and fault conditions Communications Ports
• USB and DB9 ports combine with included POWERALERT12 software to monitor operating conditions, monitor AC power, and enable safe unattended system shutdown and file saves in case of a prolonged power failure
• EPO port supports emergency shutdown in large facilities Versatile Installation Options
• Hardware included for 4-post mounting in 2U of EIA-standard 19 in. rack
• Mounts on wall or 2-post rack with optional 2POSTRMKITWM
• Mounts in upright tower position with optional 2-9USTAND

Specifications:

• Output Volt Amp Capacity (VA): 2200
• Output kVA Capacity (kVA): 2.2
• Output Watt Capacity (Watts): 1800
• Output kW Capacity (kW): 1.8
• Output Capacity Details: ON LINE MODE: Maximum output capacity is reduced to 1620 watts at 115V nominal and 1440 watts at 100V nominal; FREQUENCY REGULATION / CONVERSION MODE: Maximum output ratings are