Tripp Lite SU2200RTXLCDTAA 2200VA 1800W UPS Smart Online Rackmount - LCD 120V USB DB9 2U TAA SU2200RTXLCDTAA

The Tripp Lite SU2200RTXLCDTAA 2200VA UPS system protects connected equipment against equipment damage, downtime and data loss due to power outages, voltage fluctuations and transient surges. Featuring a 1800W capacity, high 0.8 power factor, true on-line operation with pure sine wave output and zero transfer time to battery, the SU2200RTXLCDTAA provides the highest level of battery backup and AC power protection for critical server, network and telecom equipment.

UPS battery backup keeps connected equipment operational through short power failures, and provides time to save data and perform an orderly system shutdown in case of a prolonged blackout. The internal battery set provides 12 minutes of support at half load and four minutes at full load. During normal operation, incoming utility power keeps the battery fully charged so backup power will be available when needed. For mission-critical applications demanding continuous uptime, the fully scalable 2.2kVA UPS can provide expandable runtime with optional external battery packs, such as Tripp Lite's BP48V242UTAA (sold separately). A battery-independent restart ensures automatic UPS power-up after lengthy power outages, even with expired batteries.

Features:

• Zero transfer time between AC power and battery for uninterrupted operation
• 570 joules protect connected devices from damaging power surges and spikes
• Optional external batteries provide additional runtime for essential applications
• Interactive LCD screen delivers detailed status, preset and control options
• Complies with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases

Specifications:

• Output
• Output Volt Amp Capacity (VA): 2200
• Output kVA Capacity (kVA): 2.20
• Output Watt Capacity (Watts): 1800
• Output kW Capacity (kW): 1.80
• Power Factor: 0.82
• Crest Factor: 3:1
• Nominal Output Voltage(s) Supported: 100V; 110V; 115V; 120V; 127V
• Nominal Voltage Details: 120V factory-default nominal voltage
• Frequency Compatibility: 50 / 60 Hz; Supports 50 to 60 Hz and 60 to 50 Hz conversion
• Output Voltage Regulation (Line Mode): +/- 2%
• Output Voltage Regulation (Economy Line Mode): +/- 10%
• Output Voltage Regulation (Battery Mode): +/- 3%
• Output Receptacles: (6) 5-15/20R; (1) L5-20R
• Load Management Receptacles: Two switchable three-outlet 5-15/20R load banks
• Output AC Waveform (AC Mode): Pure Sine wave
• Output AC Waveform (Battery Mode): Pure Sine wave
  
  Input
• Rated input current (Maximum Load): 16A
• Nominal Input Voltage(s): Supported 100V AC; 110V AC; 115V AC; 120V AC; 127V AC
• Nominal Input Voltage Description: 120V factory default
• UPS Input Connection Type: 5-20P
• Input Circuit Breakers: 30A
• UPS Input Cord Length (ft.): 10
• UPS Input Cord Length (m): 3.1
• Recommended Electrical Service: 20A 120V
• Input Phase: Single-Phase
  
  Battery
• Full Load Runtime (min.): 4 min. (1800w)
• Half Load Runtime (min.): 12 min. (900w)
• Expandable Battery Runtime: Extended runtime supported via optional external battery packs
• DC System Voltage (VDC): 48
• Battery Recharge Rate (Included Batteries): Less than 3 hours recharge to 90% (typical, full load discharge)
  
  Voltage Regulation
• Voltage Regulation Description: Online, double-conversion power conditioning maintains 2% output voltage regulation during brownouts and overvoltages.
• Overvoltage Correction Corrects overvoltages to 150V (0-100% load)
• Undervoltage Correction Corrects undervoltages to 100V at full load (90V at 100V nominal)
• Severe Undervoltage Correction Corrects brownouts to 70V (70% load) & 55V (33% load)
  
  Surge / Noise Suppression
• UPS AC Suppression Joule Rating: 570
• UPS AC Suppression Response Time: In