10Gb Network switch for converged AV networks
Luminex GigaCore 30i comes fully optimized out of the box to be used with the most advanced AV protocols. Preconfigured Quality of Service (QoS), IGMP multicast, and PTPv2 settings will assure a responsive and extremely stable network environment for the most demanding time-critical audio protocols like Dante™, AES67, Q-SYS, and many more.
With up to 1000W of total PoE budget and PoE++ on every copper port, this GigaCore switch can drive any IP PTZ camera or loudspeaker on the market today.
GigaCore 30i is the ideal solution for AV networks in fixed installations, integration and touring for lighting, audio, and video.
10Gb Connectivity
10Gb connectivity allows full network convergence of lighting control, audio, intercom, and compressed video.
AV validated for real applications
GigaCore switches are fully validated in real-world applications with major brands in the AV industry for different protocols, including NDI™, Dante™, AES67, ST-2110, IPMX, MA-Net, and many more.
We don't just approve against a protocol but actually test it. Because of real world application validation and interoperability testing, we understand the applications and make sure you can deploy our product with confidence.
Luminex support team really speaks your language and has a vast amount of AV knowledge built up, not just from talking protocols but mainly from working with you and living through your real application network challenges.
Robust yet silent design
A robust yet silent design allows you to use GigaCore in any AV environment. Fans are speed controlled to have minimal noise impact and guarantee a long-life operation. This allows you to place the GigaCore in even the most quiet environments like theaters and studio's.
Araneo to manage and monitor the complete system
All GigaCore switches can be managed with a single network-wide tool: Araneo. Araneo's online mode shows everything you need to know about the status of your GigaCore network. Data streams and topology are visualized as are the port status of every GigaCore. Monitor your network with confidence and act before the show gets interrupted!
Intuitive web UI
The built-in web UI lets you make adjustments to the settings in an intuitive way. Assigning Groups (VLANS) to ports, creating trunks or adjusting other port- and PoE settings can be done on the fly and the status page gives you an overview of the complete switch at a glance. The toolbox page allows management of profiles and lets you upgrade firmware easily.
Features:
- Most suitable applications: Fixed installations
- RLinkX (Link redundancy): Yes
- Groups (VLAN segmentation): Yes
- MultiLinkX (Link aggregation): Yes
- Profile manager: Yes
- Memory: Flash 1Gb RAM - 8Mb NOR flash 4Gb EMMC storage
- MAC address table: 16384 entries
- Address learning / Aging: Self learning, Auto aging
- Switching throughput: 168Gbps
- Jumbo frames: MTU up to 12000
- IGMP support: Yes (V1/V2/V3)
- IGMP snooping: Yes, enabled by default
- Port sensing: Auto negotiation
- Auto crossover: MDI / MDIX
- Auto sensing: Full or Half Duplex (Gigabit is Full Duplex)
- Ethernet connectivity: 24 x RJ45 connectors (1Gbps)
- Fiber connectivity: 6 x SFP+ cages (10Gbps/1Gbps) (independent from other ports)
- Ethernet port speed: 1Gbps
- Serial: 1 x USB C
Specifications:
- Connectivety
- Ethernet connectivity: 24x RJ45 connectors (1Gbps))
- Fiber connectivity: 6x SFP+ cages (10Gbps/1Gbps) (independent from other ports)
- Ethernet port speed: 1Gbps
- Serial: 1x USB C
Power - Power connectivity: 1x IEC (14C) inlet for each PSU
- Power input: 100-240VAC, 50-60Hz
- Power consumption: Maximum 40W non PoE version Maximum 500W/1000W with PoE
- Backup powe
