NTI 8-Port 4K 18 Gbps HDMI 2.0 / USB 2.0 KVM Switch UNIMUX-HD4K18GB-8

The NTI UNIMUX-HD4K18GB-8 4K 18Gbps HDMI USB KVM Switch allows a user to control up to 32 HDMI 2.0 Ultra-HD 4Kx2K 60Hz 4:4:4 USB computers with one USB keyboard, USB mouse, and 4K HDMI monitor. Dedicated internal microprocessors emulate keyboard and mouse presence to each attached CPU 100% of the time so all computers boot error-free.

Features:

• Supports Ultra-HD 4Kx2K resolutions to 3840x2160 and 4096x2160 @24/30/60Hz RGB/YUV 4:4:4, HDTV resolutions to 1080p @120Hz, and up to 1920x1200 (WUXGA)
• HDMI 2.0
• Up to 12-bit Deep Color on input and 8-bit on output.
• Dolby TrueHD, DTS-HD Master Audio, Dolby Digital, Dolby Digital+, Dolby Atmos, LPCM 2/5.1/7.1CH, DTS 5.1, and DTS:X
• RGB, YUV 4:4:4, YUV 4:2:2, and YUV 4:2:0
• Bandwidth up to 600 MHz (18Gbps)
• 3D (1080p @60Hz)
• HDR
• HDCP 2.2 compliant.
• Features NTI's patented true autoboot USB switching - all attached computers can be booted simultaneously.
• Compatible with USB computers (PC and MAC) with HDMI outputs.
• Control the switch through the front panel buttons, keyboard commands, OSD, or RS232.
• Two transparent USB 2.0 ports, in addition to keyboard and mouse ports, for connecting USB devices such as printers, game controllers, USB flash drives, touch screen monitors, whiteboards, etc.
• Supports high-speed (480 Mbps), full speed (12 Mbps), or low speed (1.5 Mbps) USB devices.
• High quality steel construction.
• Flash upgradeable.
• Rackmount kit included.
• Cable management tray included.

Specifications:

• Hosts
• Female HDMI-A connectors
• Female USB Type B connectors
• Supports USB-enabled computers (PC and MAC) with HDMI video
• Multiplatform support: Windows 7/8/10/11, Windows Server 2008/2012/2016/2019/2022, Linux, FreeBSD, and MAC OS 10/11/12/13
• Compliant with HDMI 2.0 and HDCP 2.2 standards
  
  Monitor
• Supports Ultra-HD 4Kx2K resolutions to 3840x2160 and 4096x2160 @24/30/60Hz RGB/YUV 4:4:4, HDTV resolutions to 1080p @120Hz, and up to 1920x1200 (WUXGA)
• One female HDMI-A connector
• Compliant with HDMI 2.0 and HDCP 2.2 standards
  
  Devices
• Two female USB 1.1 Type A connectors for keyboard and mouse
• Supports full-speed (12 Mbps) or low-speed (1.5 Mbps) USB keyboard and mouse
• Keyboard and mouse are hot-pluggable
• Supports MAC extra keys
• Two transparent female USB 2.0 Type A connectors for additional USB devices
• Supports high-speed (480 Mbps), full-speed (12 Mbps) and low-speed (1.5 Mbps) USB devices including, but not limited to, touchscreens monitors, CAC card readers, printers, scanners, and thumb drives
  
  Power
• 100 to 240 VAC at 50 or 60 Hz via IEC connector.
• 14Watts
• The combined current consumption of the connected USB devices cannot exceed 1.0A
  
  Environmental
• Operating temperature: 32 to 104°F
• Storage temperature: -22 to 140°F
• Operating and Storage Relative Humidity: 5 to 90% non-condensing RH
  
  Dimensions
• Without supplied rackmount kit: 15.32x6.82x1.75 in
• With supplied rackmount kit: 19x6.82x1.75 in
  
  Front Panel Interface Control Methods
• LEDs indicate currently selected port and mode of operation
• Hold in any button for more than five seconds to go into Scan, Broadcast or Command Mode
• In Normal Operating Mode, the user can directly operate the selected computer with transparent presence of the NTI switch
• Scan Mode automatically and sequentially displays the video from each powered on computer for 5-255 seconds
• Broadcast Mode allows the user's keystrokes to be sent to all powered on computers. (Broadcast Mode is not available for MACs.)
• Command Mode allows the user to give instructions to the switch through his/her keyboard. Keystrokes are not passed to the computer
• Keyboard
• Scan, Broadcast and Command Modes are available from the keyboard using hot keys
• Use the keyboard to command the switch box to select ports or configure the Scan delay
• Type Ctrl + <`> to go into Command Mode
• Press to leave Command Mode and return to Normal or Scan Mode
• RS232 Control
• Female RJ45 connector
• Baud rate: 1200 to 115200
  Commands
• CS - connect output (user) port to specific input (CPU) port
• CB - change baud rate
• RO - reads what input is connected to the output
• RU - reads unit size
• RV - return firmware version
• On Screen Display (OSD)
• Select computers by name with the On Screen Display (OSD)
• Use keyboard or mouse to operate the switch from menus superimposed onto the monitor
• Names can be up to 30 characters long
• Help screen assists user with the OSD
• OSD is built into the switch - no need to install additional hardware or software
• OS and software-independent

Item Includes:

• 1x NTI UNIMUX-HD4K18GB-8 8-Port 4K 18GBPS HDMI USB KVM Switch