Hall Technologies USB 2.0 over UTP Extender with 2 Port Hub U22-160

The Hall Technologies U22-160 extends your host PC's USB 2.0 port across a single Cat5e/6 cable to 50 meters (165 ft) with data rates up to 480 Mb/s. In most instances, no power supply is needed for either side as the local (host) side gets its power from the PC and it sends PoC (Power-over-Cable) to the remote (device) side. However for convenience a power supply is included that can be plugged in to the remote end for power hungry USB devices. The remote end has a two port hub built-in to allow connection of 2 USB Devices.

The U22-160 is a perfect solution for industrial and commercial applications. This product can be used to extend a broad range of USB devices like webcams, printers, keyboards, and disk drives up to 165 ft (50 m) using single Cat 5/6 cable.

Features:

• Extends USB 2.0 devices up to 165 ft (50 m) using Cat5
• Supports high-speed, full-speed, and or low-speed devices
• Status LEDs indicate Power and Data
• Supports Hot Plug/Unplug
• Can power most USB devices without power supply
• Plug and Play installation
• Surface/Wall mount brackets included

Specifications:

• Bus Interface: USB 2.0
• Number of Ports: 2 (on the Remote Unit)
• Local unit: 1 x USB type B female; 1 x RJ45 Ethernet female; 1 x DC Power supply
• Remote Unit: 2 x USB type A female; 1 x RJ45 Ethernet female; 1 x DC Power supply
• LEDs: 1 x Power, 1 x Data
• Max Data Rate: 480 Mbps
• Max Cable Distance: 50m (165 ft)
• Cable Type: Cat 5e/6/6a
• Power Supply: 5V DC 2A
• Operating Temperature: 32 to 122 °F
• Operating Humidity: 20% - 80% RH
• Dimensions (Ends): 2.5 x 1.3 x 0.9 inch
• Shipping Dimensions: 9.5 x 8 x 3 inch
• Weight: 1 lbs

Item Includes:

• 1x Hall Technologies U22-160 USB 2.0 over UTP Extender with 2 Port Hub