Kramer VP-778 8-Input Presentation Matrix Switcher/Scaler with Seamless Video Cuts & 4K30 Output Support VP-778/110V

The Kramer VP-778 is a presentation matrix switcher/scaler that can be configured as a single 4K output (4K @ 30Hz UHD [3840x2160]) or dual HD scaler with full PiP capabilities. It can scale to two independent HDMI outputs, each with a parallel HDBaseT output. VP-778 includes both analog and embedded audio inputs and outputs and audio DSP features. It also features two microphone inputs and digital & analog balanced stereo and amplified speaker outputs. VP-778 can be controlled using built-in web pages, RS-232 and IR.

Perfect for:
Projection systems in conference rooms, boardrooms, auditoriums, hotels and churches, production studios, rental and staging
Any application where high quality switching and/or scaling of multiple and different video signals is required for projection purposes

Features:

• Pix Perfect™ Scaling - State-of-the-art Kramer technology.
• K-IIT XL™ Picture-in-Picture Image Insertion Technology - Ultra-stable picture-in-picture, picture-and-picture and split-screen.
• Seamless Video Switching - Swap or follow (transition type) and cut or fade (transition effect).
• Dual Scalers - "Live" seamless transitions with two independent outputs.
• 8 Input Buttons per Channel.
• Main and PiP Window Customization - In overlay mode.
• Projection Setups - Front, back, ceiling front and ceiling back.
• Output Resolutions - Up to 4K@30Hz UHD (3840x2160) in single-window mode, HDTV and computer graphics resolutions with selectable refresh rates.
• Inputs - Choice of HDMI, VGA, YUV, or CV on two DVI-U inputs, 4 HDMI and 2 HDBaseT inputs.
• Two Programmable User Buttons - For passing serial commands.
• Serial Comms Matrix - Up to eight sets of configurable unidirectional connections for passing serial data from source to destination.
• HDBaseT™Technology - Max. data rate of 6.75Gbps (2.25Gbps per graphic channel).
• System Range (HDBaseT™) - Up to 130m (430ft) in normal mode; up to 180m (590ft) in ultra-mode (1080p @60Hz @24bpp) when using BC-UNIKAT cables.
• Cables - For optimum range and performance, use the recommended Kramer cables available at www.kramerav.com/product/VP-778.
• Audio - Balanced stereo audio inputs, two microphone inputs, digital stereo and balanced stereo outputs, input/output audio level adjustment, and audio DSP.
• Built-in 2x10W Power Amplifier - Speaker outputs on a 4-pin terminal block connector.
• Microphone - Talkover or mix modes.
• Auto Switching - Automatically scans inputs based on a predefined priority and selects first live input found or last connected.
• Audio-Follow-Video (AFV) & Breakaway.
• Advanced De-interlacing - 3D comb filtering, film mode, diagonal correction, and motion detection.
• Multiple Aspect Ratio Selections.
• Built-in Proc-Amp - With enhanced functions such as color correction, gamma, dither, and noise reduction.
• Power Management Modes - Save energy and money.
• HDCP Compliance.
• Luma - and Chroma-Keying.
• Advanced EDID Management - Native resolution and color depth modeline per input.
• Built-in Test Patterns - For screen setup and alignment.
• Output EDID Analysis - For optimal scaling.
• Input & Output Color Space Control.
• HDMI Deep Color.
• On-Screen Display (OSD) - Provides easy setup and adjustment.
• Non-Volatile Memory - Retains settings.
• Firmware Upgrade Input - Via USB memory stick.
• Various Control Options - Front panel buttons, Ethernet web page, RS-485, IR, RS-232 serial commands transmitted by a touch screen system, PC, or other serial controller.

Specifications:

• INPUTS
• 4 HDMI (deep color) connectors
• 2 DVI-U (deep color) connectors (DVI, HDMI, PC, YPb Pr, CV)
• 2 HDBT on RJ-45 connectors
• 4 HDMI, 2 DVI-U, 2 HDBT on 3.5mm mini jack connectors
• 2 Mic unbalanced and high impedance on 6mm jack connectors (with selectable 48V phantom power)
  
  
• OUTPUTS
• 2 HDMI (deep color) connectors
• 2 HDBaseT on an RJ-45 connector
• 1 S/PDIF digital audio on an RCA connector
• 1 balanced stereo audio on a 5-pin terminal block connector
• 1 stereo speaker output, 2x10W into 8?, on a 4-pin terminal block connector
  
  
• COMPLIANCE WITH HDMI STANDARD
• Supports HDMI and HDCP
  
  
• OUTPUT RESOLUTIONS
• 640x480@60Hz, 640x480@75Hz, 800x600@50Hz, 800x600@60Hz, 800x600@75Hz, 1024x768@50Hz, 1024x768@60Hz, 1024x768@75Hz, 1280x768@50Hz, 1280x768@60Hz, 1280x800@60Hz, 1280x1024@50Hz, 1280x1024@60Hz, 1280x1024@75Hz, 1360x768@60Hz, 1366x768@50Hz, 1366x768@60Hz, 1400x1050@50Hz, 1400x1050@60Hz, 1600x900@60Hz, 1600x1200@50Hz, 1600x1200@60Hz, 1680x1050@60Hz, 1920x1200@60Hz, 480i@60Hz, 480p@60Hz, 576i@50Hz, 576p@50Hz, 720p@50Hz, [email protected], 720p@60Hz, [email protected], 1080p@24Hz, 1080p@25Hz, [email protected], 1080p@30HZ, 1080p@50Hz, [email protected], 1080p@60Hz, 2048x1080@60Hz, 2048x1080@50Hz, 4K2K@30Hz
  
  
• CONTROLS
• Front panel buttons, OSD, IR remote control, web pages, 2 RS-232 on terminal block connector, Ethernet, cond/dyn selector switch
  
  
• OPERATING TEMPERATURE
• 0° to +40°C (32° to 104°F)
  
  
• STORAGE TEMPERATURE
• -40° to +70°C (-40° to 158°F)
  
  
• HUMIDITY
• 10% to 90%, RHL non-condensing
  
  
• POWER CONSUMPTION
• 100-240V AC, 50VA max

Item Includes:

• VP-778 Presentation Matrix Switcher/Dual Scaler
• Rack ears (1 set)
• Rubber feet (4)
• IR remote control transmitter with batteries
• Power cord
• Quick start guide
• DVI (M) to 15-pin HD (F) (AD-DM/GF) (2)
• DVI-A (M) to 5 BNC (F) adapter cables (ADC-DMA/5BF-1) (2)

Warranty:

• Limited 7 Year Warranty