Luminex GigaCore 10t Managed Ethernet Switch with 8x EtherCON Ports and 2x Neutrik DUO MMF LU0100079-NDM-1G

The GigaCore 10t is a 1 Gigabit Ethernet switch for professional touring applications in lighting, audio, and video with a frequent tear-down & built-up requirement or for any other application where rugged connectivity is necessary. It is designed to support the most advanced AV protocols out of the box and is the backbone for a converged network, allowing multiple applications to co-exist on the same network.

AV Validated for Real Applications
GigaCore switches are fully validated in real-world applications with major brands in the AV industry for different protocols, including NDI™, Dante™, AVB/MILAN, RAVENNA/AES67, ST-2110, IPMX, MA-Net, and many more. Luminex doesn't just approve against a protocol but actually tests it. Because of real world application validation and interoperability testing, they understand the applications and make sure you can deploy their product with confidence.

Robust and Silent Design
Robust housing allows you to use GigaCore in any AV environment.Fans are speed controlled to have minimal noise impact and guarantee a long-life operation. This allows you to place the GigaCore in the quietest environments like theaters and studio's.

Manage and Monitor your Complete System with Araneo
For optimized consistency, all GigaCore switches can be managed with a single network-wide tool: Araneo. Araneo's online mode shows everything you need to know about the status of your GigaCore network. Data streams and topology are visualized, as are the port status of every GigaCore. Monitor your network with confidence and act before the show gets interrupted! In offline mode, Araneo lets you plan the complete network topology and GigaCore settings in advance. Reducing network commissioning time to a mere click of a button. Araneo Health Check proactively checks vital parameters of your network and ensures consistency throughout.

Intuitive Web UI
The built-in web UI allows you to adjust the settings in an intuitive way. Assigning Groups (VLANS) to ports, creating trunks, or adjusting other port- and PoE settings can be done on the fly and the status page gives you an overview of the complete switch at a glance. The toolbox page allows management of profiles and lets you upgrade firmware easily.

Please Note: Image is for reference only. FiberFox fiber connectors are sold as a seperate unit.

Features:

• RLinkX (Link redundancy)
• Groups (VLAN segmentation)
• MultiLinkX (Link aggregation)
• Profile Manager
• Jumbo frames MTU up to 12000
• IGMP support V1, V2, V3
• IGMP snooping enabled by default
• Auto negotiation Port sensing (Copper ports)
• MDI and MDIX auto crossover
• Full or Half Duplex Auto sensing
• Dark mode available
• TAA Compliant

Specifications:

Connectivity
• Ethernet:
  - 4x 1Gbps front EtherCON ports
  - 4x 1Gbps rear EtherCON Ports
• Fiber: 2x Neutrik DUO MMF
• Power: 1x PowerCON true 1 in
• Power Input: 100V - 240VAC, 50/60Hz
• Power Consumption: Max 30W
  
  Protocols
• Supported Protocols: Dante(C), RAVENNA/AES67(C), Ethersound(C), Q-SYS/Q-LAN, sACN, ArtNet, MANet2, HogNet, RTTrPL (BlackTraX), IEEE 802.1p CoS (Class of Service), DiffServ (DSCP), PoE (802.3af) (optional), IEEE 1588 PTP V2, AVB/MILAN, IEEE 802.1as (gPTP) and more
• Sound Protocol Compliance: Yes (low jitter)
• Ethernet Compliance: IEEE 802.2, IEEE 802.3, IEEE 802.3u, IEEE 802.3x Flow Control, IEEE 802.3ab Gigabit Ethernet, IEEE 802.1p CoS, IEEE 802.1d Spanning Tree, IEEE 802.1w Rapid Spanning Tree, EEE 802.1s Multiple Spanning Tree, IEEE 802.1Q VLAN, IEEE 802.1ab LLDP, IEEE 1588-2008 PtPv2, IEEE 802.1 BA-2011 AVB, IETF RFC2710, IETF RFC3810
  
  Configuration
• Display and Jog: No
• NFC: No
• Configuration: Through the built-in web server, Network wide configuration through Araneo software
  
  Status LEDs
• Global Status LEDs: Device, power, PoE power and mode
• Port Status LEDs: Groups, link/activity and port speed
• Colored RGB LEDs: Yes
  
  Physical
• Mounting: Rack, Truss (2x M10)
• Enclosure: Robust metal housing
• Dimensions (LxWxH): 13" x 8.66" x 1.73" (330mm x 220mm x 44mm)
• Weight: 7.49lbs (3.4kg)
• Operating Temperature: 32°F - 122°F (0°C - 50°C)
• Storage Temperature: -40°F - 158°F (-40°C - 70°C)
• Humidity (Non Condensing): 5% - 95% RH
• Ingress Protection: Yes
• Silent Fan Mode: Yes
• Noise Level @ 1m: TBC
• BTU:
  - 10t: Maximum BTU = 51.18 BTU/hr
  - 10t with PoE: Maximum BTU = 204.72 BTU/hr